Car Park Barrier - BR530

Car Park Barrier - BR530

The best seller model

Car Park Barrier - BR530

Car Park Barrier – BR530 usually works with Access Control System. This is to ensure the safety and security of specific area especially private residential area and private company or commercial area. To make sure the whole process flow works perfectly, a full set of devices need to be installed. A reader such as Touch & GO reader is link with Car Park Barrier which is controlled by Access Control System is installed. Only valid card is saved in device. When a person wants to enter the site or area which is controlled using Access Control Solutions, he needs to tap the card on the reader installed. Then the reader will verified whether the card is a valid card or entry. If yes, the reader will trigger the controller to open the car park barrier. BR530’s standard 3 sec speed is optimized to be more affordable for site with medium traffic. BR530 can support maximum 4 meter arm that can fully cover the width of typical car lane. BR530 is the best seller model that is most commonly installed in residential and commercial building.

Application

Suitable for outdoor as well as indoor parking area at airport, shopping mall, warehouse, hotel, factories, condominium, car rental company, etc. Can also be customized to be used together with any auto-pay or ticketing parking system.

Features

No limit switch. Smart sensor auto-detects open and close position for higher accuracy. Combination of unique lever design and smart motor control allow swift arm movement that reduces bouncing at end position. Heavy duty. AC  motor is stronger and maintenance free (no need to change carbon). Compressed counter balance spring avoid possibility of spring over-stressed and break due to high volume continuous open/close cycle. Safe. Arm will auto-reverse when hitting an obstacle during closing.  Additional photo beam and traffic light (red & green) can be added to further enhance safety. Built-in MCB to protect against any electric hazard. Durable. Sturdy and strong housing (2.5 mm thickness mild steel). Housing is polished, phosphorized and further finished with plastic coating to ensure long lasting bright colors. Secure.  All internal parts inside housing is protected by cam lock to avoid tampering. User friendly. Clutch can be conveniently released without opening casing. Arm can be easily lifted or closed by hand after clutch is released. More intuitive control – 3 separate input for arm up, stop and down.

Specifications

Description Parameter
Mechanical temperature -40°C to 75°
Electrical temperature -10°C to 75°C
Power supply input 220V ± 10% AC, 50 / 60Hz
Power consumption 80 watt
Relative humidity <90%Arm speed1, 1.8, 3, 6 second
Internal lubrication Grease